To improve your shopping experience today and in the future, this site uses cookies.
I Accept Cookies

Chevin Cycles Workshop

Why Choose Us

Our technicians are all experienced road and mountain bike riders, trained to ATG Cytech Level 2 and above, guaranteeing you will always get the best advice and quality of service.

Our Service Technicians are now Bosch certified and can carry out specific eBike Servicing, including full diagnostics and software updates. All of our workshops are equipped with all the latest diagnostic systems and access to the full spares catalogue to support and service your Bosch eBike.

Please note - Our workshop is receiving a large amount of bookings currently. To check lead time and to book a service please call us. Once booked in, we'll have your bike finished the same day as long as the parts are in stock.

  • Otley - 01943 462 773
  • Harrogate - 01423 568 222

Quick Service

As cyclists we understand your frustration when things go wrong with your bike, whether it's your only mode of transport or, you need it for that all important race, we will do our best to get you back up and running as soon as we can.

Any Brand

We will carry out work on all cycles, not just the brands we sell.

Opening Hours

Our Service Departments are open Monday to Friday 9.00am - 6pm. Saturday we are open from 9am - 5:30pm and Sunday 10am - 4pm.

Service Levels



  • Bicycle frame visually checked for external wear and damage.
  • Handlebar, stem, seat post and seat checked for security and alignment.
  • Drivetrain inspected for damage and wear.
  • Gears and brakes adjusted within their working tolerance.
  • Drivetrain lubricated if required.



  • Bicycle frame visually checked for external wear and damage.
  • Handlebar, stem, seat post and seat checked for security and alignment.
  • Drivetrain inspected for damage and wear.
  • Chain and cassette cleaned and degreased.
  • Gears and brakes adjusted within working tolerance (if disc brakes require bleeding, they will incur a £5 additional cost per brake).
  • Wheels and tyres checked for alignment and wear (trueing included if required).
  • Service report available if requested.



  • The ultimate service for your bike.
  • A complete strip down of your bicycle back to its frame, each component cleaned and inspected for wear and damage.
  • Headset, bottom bracket and hubs stripped, cleaned and serviced (replacement bearing cost not included).
  • Replacement of mechanical gear/brake inner and outer cables.
  • Brake fluid change on disc brakes.
  • Bicycle rebuilt using fresh grease.
  • Service report available if requested.

Service Menu

Type of serviceDescriptionPrice
Cycle Health CheckFree cycle health check including a full report detailing work that needs to be carried outFree
Silver Service£60.00
Gold Service£90.00
Platinum Service£250.00
Cycle Accident Insurance QuoteFull cycle inspection report following an accident£40.00
Cycle Theft Insurance QuoteInsurance quotation following a theft£15.00
Di2 Firmware UpdateShimano Electronic Di2 firmware update£20.00
Bike BuildFull bike assembly(excluding parts)From £100
Thread TappingFrom £5
Cleaning ChargeLocalised to enable mechanics to fulfil the job requirements£20.00
Accessory FittingFrom £5
Mudguard Fitment£35.00
Dropper Seatpost FittingFrom £35
Brake AdjustConventional brake adjust (per brake)£15.00
Hydraulic Brake BleedIncluding fresh oil/fluid (per brake)£20.00
Disc Brake FIttingIncluding frame facing (per brake)£25.00
Disc Brake ServiceStrip down and reassemble with fresh oil (excludes replacement parts)£40.00
Shorten Brake HosesCut down brake hoses (includes brake bleed)£35.00
Headset ReplacementFit new headset£30.00
Headset Bearing Replacement£15.00
Standard Handlebar Fitment£10.00
Drop Handlebar Fitment(excludes bar tape)From £20
Bar Tape Fitting£15.00
Wheels and Tyres
Replace Tyre/TubeCheck and rectify cause of puncture where applicable(per wheel)£10.00
Tubular Tyre FitmentRemoval of Old Tub/Glue/Tape (per wheel)£35.00
Wheel TrueFrom £15
Tubeless Tyre FitmentFit tubeless tyres (excludes, sealant, valves and rim tapes)£10
Hub ServiceCup and cone or cartridge bearing service (excludes parts)From £15.00
Hand Build WheelRebuild and true a wheel (excludes spokes)£50.00
Free-hub Body Fitment and Hub ServiceStrip/clean/grease (excludes new bearings)£20.00
Alfine Maintenance Service£30.00
Gear Adjust/RepairGear indexing and set up (per derailleur)From £15.00
Bottom Bracket FitmentIncluding front mech adjustment£30.00
Bottom Bracket Re-Grease£15.00
Cassette Fit/Removal£5.00
Chain Device FitmentIncluding front mech adjustment if required£25.00
Chain FitmentNOT including gear adjustment£10
Derailleur FitmentIncluding adjustment£25.00
Derailleur Hanger AlignmentWill need rear derailleur adjust (includes gear adjust)£15.00
Freewheel Fit/Removal£10.00
Fit Suspension ForkIncludes front brake adjustmentFrom £30.00
Suspension Fork ServiceIncludes fluid (excludes and other parts)From £40.00
Rear Shock ServiceAir can serviceFrom £35.00
Shock Bush ReplacementBush replacementFrom £10.00
Rear Suspension LinkagePivot bearing replacementFrom £50.00